| Specification | 32-CU | 40-CU |
|---|---|---|
| Swing Over Bed | 32" | 40" |
| Swing Over Cross Slide | 21" | 27 - 3/4" |
| Swing In The Gap | 38" | 45" |
| Length In Gap From 4-Jaw Chuck | 8" | 8" |
| Distance Between Centers | 120" / 160" / 200" / 236" | 120" / 160" / 200" / 236" |
| Spindle Nose | D1-15 | D1-15 |
| Spindle Bore | 6 - 1/16" | 6 - 1/16" |
| Spindle Bearings | SKF | SKF |
| Number Of Spindle Speeds | 16 | 16 |
| Range Of Speeds | 5.6 - 1000 RPM | 5.6 - 1000 RPM |
| Number Of Threads | 64 | 64 |
| Range Of Inch Threads | 60 - 1/4 TPI | 60 - 1/4 TPI |
| Range Of Metric Threads | 120 - .5 | 120 - .5 |
| Number Of Feeds | 64 | 64 |
| Range Of Longitudinal Feeds | .0019 - .447 | .0019 - .447 |
| Range Of Cross Feeds | .0015 - .351 | .0015 - .351 |
| Lead Screw Diameter | 2” | 2” |
| Lead Screw Pitch | 2 TPI | 2 TPI |
| Max. Traverse Of Cross Slide | 20 - 1/2" | 22" |
| Max. Traverse Of Top Slide | 10" | 10" |
| Taper Turning Working Length | 20" | 20" |
| Maximum Taper | +/- 10° | +/- 10° |
| Tailstock Quill Diameter | 4 - 7/8" | 4 - 7/8" |
| Tailstock Quill Taper Bore | 6 MT | 6 MT |
| Maximum Quill Stroke | 10" | 10" |
| Lateral Stroke Of Tailstock | +/- 3/8” | +/- 3/8” |
| Width Of Bed | 22" | 22" |
| Ways | Hardened & Ground | Hardened & Ground |
| Motor Power | 20 H.P. | 20 H.P. |
| Electrics | 3 Phase 220V (440V Opt.) | 3 Phase 220V (440V Opt.) |
| Length | 197" / 236" / 276" / 316" | 197" / 236" / 276" / 316" |
| Width | 70" | 70" |
| Height | 74" | 78" |
| Overall Weight Lbs. (Approx.) | 16,200 / 17,400 / 18,600 / 19,800 | 16,700 / 17,900 / 19,100 / 20,300 |
Specifications are subject to change without notice.